Skip to product information
Bubble Switch Plate
$14.50
The ring that presses in around the switch. Leave it on Same as Color to match the plate.
Please note
These are covers only. They carry no electrical rating and fit over your existing, correctly installed device. Configurations differ in size, so check which one you need before ordering.
Bubbles of every size, spilling right off the edge.
Whimsical and a little bit silly. Made for kids’ rooms, bathrooms and anywhere that could use a smile.
It comes in two printed pieces: the plate, and a ring that presses into the channel around the switch. Choose the plate under Color and the ring under Ring Color. Contrast them, or match them for a one-color plate. Small detents hold the ring in place, and it lifts out at the notches if you want to change the look later.
Five configurations: single toggle, rocker or outlet, and double toggle or rocker. It screws on with the screws from your existing plate.
Free mainland US shipping
On orders of $75 or more. Flat USPS Ground Advantage rates by region otherwise. Shipping policy
Arrived damaged, or not what you ordered?
Send us a photo within 7 days and we'll put it right. Returns policy
Made in Havertown, PA
Made and finished by hand in our own studio, not drop-shipped.
Specifications
- Dimensions
- 3.37 to 5.52 in wide, 5.29 in high, 0.33 in deep. Every Style option lists its own exact width.
- In the box
- One plate and one press-fit ring
- Mounting
- Screws on with the screws from your existing plate (standard 6-32). Screws not included.
- Rating
- Decorative cover only, no electrical rating
- Material
- Matte PLA, Polymaker and Elegoo
- Finish
- Matte, hand-finished
- Care
- Dry or slightly damp cloth. Keep away from flame, radiators and hot cars
- Made in
- Havertown, PA
- Good to know
- A decorative cover plate. It replaces your existing cover plate only and never touches the wiring. Turn the power off at the breaker before you swap it, or ask an electrician. Not recommended over dimmer switches, which run warm.
Materials & care
3D printed in matte PLA from Polymaker and Elegoo, and finished by hand. Dust with a dry or slightly damp cloth. Keep away from direct sunlight, radiators, and hot cars — the material can soften above about 55 °C / 130 °F. Not dishwasher safe.
Shipping & returns
Made to order in our Havertown, PA studio. Ships within 3 days. Shipping is a flat USPS Ground Advantage rate by region (3–5 business days in transit), shown at checkout before you pay, and free on mainland US orders of $75 or more. Tracking is emailed as soon as your order ships.
Because every piece is printed in your chosen colors, we can’t accept returns, exchanges, or cancellations once production has begun. Dimensions are listed above — please check them before ordering. If your order arrives damaged or isn’t what you ordered, email hello.divoire@gmail.com within 7 days of delivery with photos and we’ll make it right.
FAQ
Can I return it?
Each piece is printed to order in the colors you pick, so we can't take general returns or cancel once production starts. If it arrives damaged or isn't what you ordered, email us within 7 days with a photo and we'll sort it.
How soon does it ship?
The ship time for this piece is shown above the description and again under Shipping & returns. That's studio time — carrier transit is on top.
Is it dishwasher safe?
No. These are decorative. Wipe with a dry or slightly damp cloth, and keep them away from open flame, radiators and hot cars.
Will the color match what I see on screen?
Closely, but matte filament reads softer and more chalk-like in person than a backlit screen suggests.
Can I get a color or size you don't list?
Often, yes. Tell us what you need on the Trade & wholesale page.