Skip to product information
Cameo Switch Plate
$16.50
Leave it on Same as Color to match the plate.
Please note
These are covers only. They carry no electrical rating and fit over your existing, correctly installed device. Configurations differ in size, so check which one you need before ordering.
Pearl light switch cover with no screws on show: an oval plate ringed with round beads that presses onto a hidden base plate.
The Cameo
Two printed parts. The flat base plate screws to your switch with standard wall-plate screws. The beaded cover presses on over it and holds with a snug fit, so all you see is the pearl edge and the soft oval. It lifts straight off by hand when you want to clean or paint.
Size
Single: 4.09 × 5.59 in (104 × 142 mm)
Double: 5.91 × 5.59 in (150 × 142 mm)
Each extra switch adds 1.81 in of width.
The cover sits about 1/8 in off the wall.
Configurations
All 32 options in the Style menu are made to order: single, double, triple and quad toggles, rockers and outlets, plus the mixed and data-port combinations. The rocker version also fits Decora-style and GFCI outlets. Not sure which one you have? Send us a photo of your switch and we'll check.
Color
Pick your cover color from the Color menu, then pick a Case Color for the base plate underneath. The base plate shows as the frame around your switch. Choose "Same as Color" for a one-color plate; if you leave Case Color empty, the base plate matches the cover too.
The main photo is a Single Toggle with a Chalk cover.
A NOTE ON COLOR: screens vary, so the printed color can look a little different from the photos.
Material & Care
Printed in matte PLA in our studio, one layer at a time. Wipe clean with a damp cloth. It suits a normal interior wall; if it's going somewhere genuinely hot (above a radiator or a range, or in strong direct sun), email us and we'll print it in PETG instead.
What's Included
The beaded cover and its base plate. Screws are not included (standard wall-plate screws fit).
Made to Order
Every Cameo is printed after you order.
Free mainland US shipping
On orders of $75 or more. Flat USPS Ground Advantage rates by region otherwise. Shipping policy
Arrived damaged, or not what you ordered?
Send us a photo within 7 days and we'll put it right. Returns policy
Made in Havertown, PA
Made and finished by hand in our own studio, not drop-shipped.
Specifications
- Dimensions
- Single: 4.09 × 5.59 in (104 × 142 mm) Double: 5.91 × 5.59 in (150 × 142 mm); Each extra switch adds 1.81 in of width. The cover sits about 1/8 in off the wall.
- In the box
- The beaded cover and its base plate
- Mounting
- The base plate screws to the wall box with your existing screws (standard 6-32), then the cover presses on over it so no screws show. Screws not included.
- Rating
- Decorative cover only, no electrical rating
- Material
- Matte PLA, Polymaker and Elegoo
- Finish
- Matte, hand-finished
- Care
- Dry or slightly damp cloth. Keep away from flame, radiators and hot cars
- Made in
- Havertown, PA
- Good to know
- A decorative cover plate. It replaces your existing cover plate only and never touches the wiring. Turn the power off at the breaker before you swap it, or ask an electrician. Not recommended over dimmer switches, which run warm.
Materials & care
3D printed in matte PLA from Polymaker and Elegoo, and finished by hand. Dust with a dry or slightly damp cloth. Keep away from direct sunlight, radiators, and hot cars — the material can soften above about 55 °C / 130 °F. Not dishwasher safe.
Shipping & returns
Made to order in our Havertown, PA studio. Ships within 3 days. Shipping is a flat USPS Ground Advantage rate by region (3–5 business days in transit), shown at checkout before you pay, and free on mainland US orders of $75 or more. Tracking is emailed as soon as your order ships.
Because every piece is printed in your chosen colors, we can’t accept returns, exchanges, or cancellations once production has begun. Dimensions are listed above — please check them before ordering. If your order arrives damaged or isn’t what you ordered, email hello.divoire@gmail.com within 7 days of delivery with photos and we’ll make it right.
FAQ
Can I return it?
Each piece is printed to order in the colors you pick, so we can't take general returns or cancel once production starts. If it arrives damaged or isn't what you ordered, email us within 7 days with a photo and we'll sort it.
How soon does it ship?
The ship time for this piece is shown above the description and again under Shipping & returns. That's studio time — carrier transit is on top.
Is it dishwasher safe?
No. These are decorative. Wipe with a dry or slightly damp cloth, and keep them away from open flame, radiators and hot cars.
Will the color match what I see on screen?
Closely, but matte filament reads softer and more chalk-like in person than a backlit screen suggests.
Can I get a color or size you don't list?
Often, yes. Tell us what you need on the Trade & wholesale page.