Skip to product information
Bunny Ears Switch Plate
$14.50
Leave it on Same as Color to match the plate.
Please note
These are covers only. They carry no electrical rating and fit over your existing, correctly installed device. Configurations differ in size, so check which one you need before ordering.
A cute light switch cover with two tall bunny ears on top - no face, just the silhouette - and a press-fit ring round the switch in a second colour.
How It Works
Two printed pieces: the plate, and a ring that presses into the channel around the switch. Pick one colour for the plate and one for the ring - make the ring the accent, or match them for a single-colour plate. The ring is held by small detents and lifts out at the two notches above and below it, so you can change the look later.
Sizes
Width x height of each plate:
- Single Toggle - 2.89" x 6.11" (73 x 155 mm)
- Single Rocker - 3.36" x 6.00" (85 x 152 mm)
- Single Outlet - 3.39" x 6.00" (86 x 152 mm)
- Double Toggle - 4.70" x 6.10" (119 x 155 mm)
- Double Rocker - 5.17" x 6.00" (131 x 152 mm)
Each extra switch or outlet adds about 1.81" (46 mm) of width.
About 0.30" (7.6 mm) deep. Every plate reaches at least 2.4" (62 mm) above and below the switch, so it covers a standard wall-box cutout.
Configurations
32 configurations in the Style menu, all made to order:
- Single Toggle - one classic flip switch
- Single Rocker - one decora / paddle switch
- Single Outlet - one duplex receptacle
- Double Toggle - two flip switches side by side
- Double Rocker - two paddle switches side by side
- Double Outlet, plus triple and quad toggles, rockers and outlets
- Data port and coaxial plates, and mixed plates like Toggle & Outlet or Rocker x2 & Blank
Need a different layout? Email us - more configurations are on the way.
Colors
The Divoire Range - 21 matte colours: Chalk, Sand, Linen, Pumice, Walnut, Ink, Terracotta, Sage, Slate, Heather, Burgundy, Navy, Apricot, Blush, Mint, Sky, Lilac, Seafoam, Marigold, Saffron and Scarlet.
Choose the plate colour in the Color menu and the ring colour in the Ring Color menu below it.
A Note on Color
Screens vary, and so does light. The colour you see on your phone or monitor will not be an exact match for the filament, and a matte finish in particular tends to photograph flatter and lighter than it looks in the hand. Please treat the swatches as a close guide rather than an exact match. If a particular shade matters, email us before you order and we will send a photo of the actual spool in daylight.
Built to The Real Device
Drawn to the actual hardware rather than eyeballed. Openings are cut to standard device dimensions, gangs sit on the standard 1-13/16" (46.04 mm) box pitch, and the screw holes fall on the correct spans: 3-13/16" for rocker, 2-3/8" for toggle, and a single centre screw for outlet.
Material
Printed in matte PLA - a low-sheen finish that reads like cast plaster or glazed ceramic rather than plastic, with a flat back so the plate sits true against the wall. Matte PLA suits a normal interior wall; if the plate is going somewhere that gets genuinely hot - above a radiator or a range, or in strong direct sun - email us and we will print it in PETG instead.
What You Receive
One plate and one ring in the configuration and colours you choose. Mounting screws are not included - reuse the screws from your existing plate, or any standard 6-32 wall plate screw.
Made to Order
Each plate is printed for your order in Pennsylvania.
Please Note
These are decorative wall plates. They close the wall box, but they are not tested or listed to UL 514D.
Free mainland US shipping
On orders of $75 or more. Flat USPS Ground Advantage rates by region otherwise. Shipping policy
Arrived damaged, or not what you ordered?
Send us a photo within 7 days and we'll put it right. Returns policy
Made in Havertown, PA
Made and finished by hand in our own studio, not drop-shipped.
Specifications
- Dimensions
- Single Toggle - 2.89" x 6.11" (73 x 155 mm); Single Rocker - 3.36" x 6.00" (85 x 152 mm); Single Outlet - 3.39" x 6.00" (86 x 152 mm); Double Toggle - 4.70" x 6.10" (119 x 155 mm); Double Rocker - 5.17" x 6.00" (131 x 152 mm); Each extra switch or outlet adds about 1.81" (46 mm) of width. About 0.30" (7.6 mm) deep. Every plate reaches at least 2.4" (62 mm) above and below the switch, so it covers a standard wall-box cutout.
- In the box
- One plate and one ring in the configuration and colours you choose
- Mounting
- Screws on with the screws from your existing plate (standard 6-32). Screws not included.
- Rating
- Decorative cover only, no electrical rating
- Material
- Matte PLA, Polymaker and Elegoo
- Finish
- Matte, hand-finished
- Care
- Dry or slightly damp cloth. Keep away from flame, radiators and hot cars
- Made in
- Havertown, PA
- Good to know
- A decorative cover plate. It replaces your existing cover plate only and never touches the wiring. Turn the power off at the breaker before you swap it, or ask an electrician. Not recommended over dimmer switches, which run warm.
Materials & care
3D printed in matte PLA from Polymaker and Elegoo, and finished by hand. Dust with a dry or slightly damp cloth. Keep away from direct sunlight, radiators, and hot cars — the material can soften above about 55 °C / 130 °F. Not dishwasher safe.
Shipping & returns
Made to order in our Havertown, PA studio. Ships within 3 days. Shipping is a flat USPS Ground Advantage rate by region (3–5 business days in transit), shown at checkout before you pay, and free on mainland US orders of $75 or more. Tracking is emailed as soon as your order ships.
Because every piece is printed in your chosen colors, we can’t accept returns, exchanges, or cancellations once production has begun. Dimensions are listed above — please check them before ordering. If your order arrives damaged or isn’t what you ordered, email hello.divoire@gmail.com within 7 days of delivery with photos and we’ll make it right.
FAQ
Can I return it?
Each piece is printed to order in the colors you pick, so we can't take general returns or cancel once production starts. If it arrives damaged or isn't what you ordered, email us within 7 days with a photo and we'll sort it.
How soon does it ship?
The ship time for this piece is shown above the description and again under Shipping & returns. That's studio time — carrier transit is on top.
Is it dishwasher safe?
No. These are decorative. Wipe with a dry or slightly damp cloth, and keep them away from open flame, radiators and hot cars.
Will the color match what I see on screen?
Closely, but matte filament reads softer and more chalk-like in person than a backlit screen suggests.
Can I get a color or size you don't list?
Often, yes. Tell us what you need on the Trade & wholesale page.