Skip to product information
Crescent Switch Plate
$12.00
Leave a menu on As pictured for the colour shown in the Where your colors go photo, or choose Same as Color to match the plate.
Please note
These are covers only. They carry no electrical rating and fit over your existing, correctly installed device. Configurations differ in size, so check which one you need before ordering.
A beach light switch cover with a sweeping wave between two bands of color on a pebble-shaped plate. The colors are printed into the surface, so the face is completely smooth and flush.
The Crescent
One solid plate with every color printed right into it. No paint, no stickers.
Size
Single: 2.92 × 5.02 in (74 × 128 mm), about 0.2 in thick.
Each extra switch adds 1.81 in of width. The size chart photos show all 32 options with their widths.
Configurations
All 32 options in the Style menu are made to order: single, double, triple and quad toggles, rockers and outlets, plus the mixed and data-port combinations. Not sure which one you need? Send us a photo of your switch and we'll check.
Colors
Choose your colors at checkout from our 21 matte colors (see the color chart photo). The second photo shows where each one goes:
Color: the middle wave
Left Side Color: the left side
Right Side Color: the right side
Shown in Sky with Sage and Sand. For a one-color plate, pick "Same as Color" in the accent menus.
A NOTE ON COLOR: screens vary, so the printed colors can look a little different from the photos.
Material & Care
Printed in matte PLA in our studio. Wipe clean with a damp cloth. It suits a normal interior wall; if it's going somewhere genuinely hot (above a radiator or a range, or in strong direct sun), email us and we'll print it in PETG instead.
Made to Order
Every plate is printed after you order.
Free mainland US shipping
On orders of $75 or more. Flat USPS Ground Advantage rates by region otherwise. Shipping policy
Arrived damaged, or not what you ordered?
Send us a photo within 7 days and we'll put it right. Returns policy
Made in Havertown, PA
Made and finished by hand in our own studio, not drop-shipped.
Specifications
- Dimensions
- Single: 2.92 × 5.02 in (74 × 128 mm), about 0.2 in thick. Each extra switch adds 1.81 in of width.
- In the box
- One plate
- Mounting
- Screws on with the screws from your existing plate (standard 6-32). Screws not included.
- Rating
- Decorative cover only, no electrical rating
- Material
- Matte PLA, Polymaker and Elegoo
- Finish
- Matte, hand-finished
- Care
- Dry or slightly damp cloth. Keep away from flame, radiators and hot cars
- Made in
- Havertown, PA
- Good to know
- A decorative cover plate. It replaces your existing cover plate only and never touches the wiring. Turn the power off at the breaker before you swap it, or ask an electrician. Not recommended over dimmer switches, which run warm.
Materials & care
3D printed in matte PLA from Polymaker and Elegoo, and finished by hand. Dust with a dry or slightly damp cloth. Keep away from direct sunlight, radiators, and hot cars — the material can soften above about 55 °C / 130 °F. Not dishwasher safe.
Shipping & returns
Made to order in our Havertown, PA studio. Ships within 3 days. Shipping is a flat USPS Ground Advantage rate by region (3–5 business days in transit), shown at checkout before you pay, and free on mainland US orders of $75 or more. Tracking is emailed as soon as your order ships.
Because every piece is printed in your chosen colors, we can’t accept returns, exchanges, or cancellations once production has begun. Dimensions are listed above — please check them before ordering. If your order arrives damaged or isn’t what you ordered, email hello.divoire@gmail.com within 7 days of delivery with photos and we’ll make it right.
FAQ
Can I return it?
Each piece is printed to order in the colors you pick, so we can't take general returns or cancel once production starts. If it arrives damaged or isn't what you ordered, email us within 7 days with a photo and we'll sort it.
How soon does it ship?
The ship time for this piece is shown above the description and again under Shipping & returns. That's studio time — carrier transit is on top.
Is it dishwasher safe?
No. These are decorative. Wipe with a dry or slightly damp cloth, and keep them away from open flame, radiators and hot cars.
Will the color match what I see on screen?
Closely, but matte filament reads softer and more chalk-like in person than a backlit screen suggests.
Can I get a color or size you don't list?
Often, yes. Tell us what you need on the Trade & wholesale page.